WARNING:
JavaScript is turned OFF. None of the links on this concept map will
work until it is reactivated.
If you need help turning JavaScript On, click here.
This Concept Map, created with IHMC CmapTools, has information related to: Deadship to Full Away, Deaerator feeds the (2) 2 Boilers, Condenser needs to be emptied by starting the (15) Condensate System, Propulsion Turbine Plant runs at steady state after Full away, Main Condenser needs (11, 12) Sea Water Circ System, A Resource-based Advance Organiser for Simulation using IHMC CmapTools Example Revive a Steam Propelled LNG Deadship [e.g. Coming out of Dry Dock] 20 Simulation Exercises Singapore Maritime Academy (Created by K. Chatterjea, June 2006), Revive a Steam Propelled LNG Deadship [e.g. Coming out of Dry Dock] 20 Simulation Exercises Singapore Maritime Academy (Created by K. Chatterjea, June 2006) Simulation Exercises are meant for Management Level Engineers [Meant only for Upgrading of Steam Knowledge], Turbo Generator parallel to (14) Busbar, Steam Propulsion Plant must be filled with Water, 2 Boilers Steaming controlled by starting (4, 5) Automatic Control System, LP Steam Generator provides low pressure steam for preparing (9) Heavy Fuel Oil for Boilers, Diesel Oil fires the boiler to working pressure (6.0 MPa) 2 Boilers Steaming, Full away start (19) Scoop, Various Steam Consumers e.g. Distillers, Turb Genrators. output to Main Condenser, Vacuum in condenser is required to start (13) Turbo Generator, Turbo Generator steam output fills up Condenser, 2 Boilers Steaming controlled by starting (4, 5) Turbo Feed Pump, Full away start (20) Distiller, HFO Fired Boilers output steam to Various Steam Consumers e.g. Distillers, Turb Genrators., Heavy Fuel Oil for Boilers when temperature adequate change over fuel (10) HFO Fired Boilers, DO Fired Boilers opens steam to 2nd Consumer (8) LP Steam Generator